Brands for an
active lifestyle

We are convinced that both experiences and conditions for an active life are improved with the right equipment. Whether it's cycling to work, learning new tricks on the slopes, or enjoying a night off the beaten path - our brands provide you with the best conditions through good equipment.

Peaty's Holeshot CO2 Cartridge 5-Pk MTB (25g)

Peaty's Holeshot CO2 Cartridge 5-Pk

MTB (25g)

Product nr:PPR-CO2-REF-MTB-125060541583917
RRP36.99 EUR
DescriptionSupport
Description
Peaty's Holeshot CO2 Cartridge Refill Pack


Included:
- 5 x threaded CO2 cartridges pr pack


Please read all instructions before first use.

- Make sure CO2 gas is fully discharged after each use by pushing head several times against a hard temperature-resistant surface
- Fits all 16g / 25g threaded cartridges
- Always use the CO2 sleeve supplied to protect hands from extreme cold during inflation
- Always carry CO2 Cartridges separate from the inflator head to prevent accidental discharge in transit


Warning
1. Do not use with CO2 cartridges over 25g.
2. If using multiple CO2 cartridges in one session, wait 30 seconds between each cartridge to prevent ice build-up in the inflator head.
3. Ensure the inflator head is fully threaded onto the CO2 cartridge before use. Failure to secure tightly will cause improper operation and may cause injury.
4. Test the cartridge is fully pierced before use by briefly pressing the head down onto a hard, temperature resistant surface and ensure a high flow of CO2 being discharged from the inflator head.
5. Do not remove the CO2 cartridge until it is fully discharged.
6. Check CO2 gas is fully discharged after each use by pushing head several times against a hard temperature-resistant surface.
7. Point away from yourself and others while using.
8. Do not use if any part is cracked or damaged.
9. Do not expose the CO2 cartridge to heat, store at temperatures above 49C (120F), or store in enclosed vehicles.
10. Make sure to wear gloves when inflating to avoid injury.
11. The inflator head and CO2 cartridge will become very cold/frosty when the CO2 gas is expelled. Do not unscrew the used cartridge until it has warmed enough to touch.
12. Keep out of reach of children.
Support